AlphaBot2 robot building kit for Raspberry Pi Zero/Zero W (no Pi) +Ultrasonic sensor+RPi Camera (B)+Pi Zero V1.3 Camera Cable
199 in stock
£154.78 £179.98
AlphaBot2 robot building kit for Raspberry Pi Zero/Zero W (no Pi)
Note: Raspberry Pi Zero/Zero W is NOT included
Overview
This AlphaBot2 robot kit is designed to use with Raspberry Pi Zero/Zero W (not included). It features rich common robot functions including line tracking, obstacle avoiding, ultrasonic ranging, Bluetooth/infrared/WiFi remote control (Bluetooth and WiFi are Zero W specific), video monitoring, etc.
Thanks to the highly integrated modular design, it is fairly easy to assemble by a snap, no soldering, no wiring. After a few minutes spent on hardware assembing, you’re almost there, our open source demo codes is ready to help you get started fast.
AlphaBot2 Features
AlphaBot2 employs a 2-layer structure to provide excellent stability and compatibility.
AlphaBot2-Base, the lower base chassis:
- 5-ch infrared sensor, analog output, combined with PID algorithm, stable line tracking
- Onboard modules like line tracking, obstacle avoiding, needs no messy wiring
- TB6612FNG dual H-bridge motor driver, compared with L298P, it’s more efficient, more compact, and less heating
- N20 micro gear motor, with metal gears, low noise, high accuracy
- Onboard RGB LEDs, true color lighting, pretty cool
AlphaBot2-PiZero, the upper adapter board for controller:
- LM2596 voltage regulator, provides the Pi with stable 5V power
- TLC1543 AD acquisition chip, allows the Pi to use analog sensors
- PCA9685 servo controller, make it more smoothly to rotate the pan head
- CP2102 UART converter, easy for controlling the Pi via UART
- USB HUB chip, more USB ports for devices like NIC
What’s on the AlphaBot2-Base
- AlphaBot2 control interface: for connecting sorts of controller adapter board
- Ultrasonic module interface
- Obstacle avoiding indicators
- Omni-direction wheel
- ST188: reflective infrared photoelectric sensor, for obstacle avoiding
- ITR20001/T: reflective infrared photoelectric sensor, for line tracking
- Potentiometer for adjusting obstacle avoiding range
- TB6612FNG dual H-bridge motor driver
- LM393 voltage comparator
- N20 micro gear motor reduction rate 1:30, 6V/600RPM
- Rubber wheels diameter 42mm, width 19mm
- Power switch
- Battery holder: supports 14500 batteries
- WS2812B: true color RGB LEDs
- Power indicator
What’s on the AlphaBot2-PiZero
- AlphaBot2 control interface: for connecting AlphaBot2-Base
- LM2596: 5V voltage regulator
- Raspberry Pi interface: for connecting Raspberry Pi Zero/Zero W
- IR receiver
- Buzzer
- FE1.1S: USB HUB chip
- 12M crystal
- USB TO UART: easy for controlling the Pi via UART
- USB HUB interface: extends the USB port of Raspberry Pi Zero/Zero W
- CP2102: USB TO UART converter
- PCA9685: servo controller, make it more smoothly to rotate the pan head
- TLC1543: 10-bit AD acquisition chip, allows the Pi to use analog sensors
- Servo interface
- USB indicators
- USB ports: more USB capability
Photos
Note: photos are FOR REFERENCE ONLY, the other boards/modules/accessories are NOT included in the price.
Examples
Note: photos are FOR REFERENCE ONLY, the other boards/modules/accessories are NOT included in the price.
Dimensions
Development Resources
Wiki :
Selection Guide
Package Contents | Products | |||||
---|---|---|---|---|---|---|
Item | Description | AlphaBot2-Ar Acc Pack | AlphaBot2-Ar | AlphaBot2-Pi Acc Pack | AlphaBot2-Pi | AlphaBot2-PiZero Acc Pack |
AlphaBot2-Base | Motor driver, integrates sensors for obstacle avoiding, line tracking | √ | √ | √ | √ | √ |
AlphaBot2-Ar | Adapter board, for connecting Arduino | √ | √ | |||
AlphaBot2-Pi | Adapter board, for connecting RPi3 B | √ | √ | |||
AlphaBot2-PiZero | Adapter board, for connecting RPi Zero W | √ | ||||
RPi3 B | Raspberry Pi 3 Model B | √ | ||||
UNO PLUS | Enhanced Arduino compatible board | √ | ||||
Dual-mode Bluetooth | Dual-mode Bluetooth module | √ | ||||
Ultrasonic sensor | Ultrasonic obstacle avoiding, ranging | √ | √ | √ | ||
IR remote controller | remotely control the robot | √ | √ | √ | √ | √ |
RPi Camera (B) | Raspberry Pi camera, adjustable focus | √ | √ | √ | ||
SG90 | Servo, working with the pan head, controlling the rotation of the camera | √ | √ | √ | ||
Micro SD Card 16GB | 16GB Miro SD Card, class 10 | √ | √ | √ | ||
5V 2.5A Power Adapter | RPi3 B requires 2.5A or above power supply | √ | √ | √ |
Note:
AlphaBot2-Ar Acc Pack requires an Arduino compatible controller, if you don’t have one in hand, please consider the all-in-one kits: .
AlphaBot2-Pi Acc Pack requires the controller Raspberry Pi, if you don’t have one in hand, please consider the all-in-one kit: .
AlphaBot2-PiZero Acc Pack requires the controller Raspberry Pi Zero/Zero W, which should be purchased separately.
Due to the structure design, ultrasonic sensor module can NOT be used with the AlphaBot2-Pi kit.
PACKAGE CONTENT
AlphaBot2-Pi Acc Pack
Note: this product requires two 14500 batteries to work, which are NOT included and should be purchased separately.
- AlphaBot2-PiZero (adapter board) x1
- AlphaBot2-Base (base chassis) x1
- RPi Camera (B) x1
- Ultrasonic sensor x1
- Micro SD Card 16GB x1
- Power adapter US standard 5V/2.5A USB output x1
- SG90 servo x2
- 2 DOF pan and tilt kit x1
- IR remote controller x1
- FC-20P cable 8cm x1
- Micro USB connector x1
- RPi Zero V1.3 Camera Cable 30cm x1
- USB type A plug to micro B plug cable x1
- AlphaBot2-PiZero screws x1
- Micro SD Card Reader x1 (Extra Free)
- Screwdriver x1 (Extra Free)
There are no reviews yet.