It is a perfect case & cooling kits for Orange Pi PC, Orange pi PC Plus, and Orange Pi PC 2, we use nickel-plating copper spacer to install the case, it’s looks beautiful !
[Packing List:(Not include Orange pi Board)]
1 x Acrylic case (with install screws)
1 x Cooling Fan (with install screws with metal cover)
2 x Aluminum Alloy heat sinks (14mm*14mm)
[Installation Guide]
1/ Mount the bottom shell to the PC / PC2 / PC Plus.
2/ Install the cooling fan onto the top shell.
3/ Plug the power cable onto the GPIO port (follow instructions on Picture)
4/ Install the two side shells, then istall the front shell with USB openning, then the back shell.
5/ Install the top shell with colling fan.
6/ At last, you will make it work as the pictues show below.
[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text]
[/vc_column_text][/vc_column][/vc_row]
[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text]
[/vc_column_text][/vc_column][/vc_row]
[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text]
[/vc_column_text][/vc_column][/vc_row]
[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_column_text]
[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_column_text]
[/vc_column_text][/vc_column][/vc_row]
[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_column_text]
[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_column_text]
[/vc_column_text][/vc_column][/vc_row]
[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text]
[/vc_column_text][/vc_column][/vc_row]
[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text]
[/vc_column_text][/vc_column][/vc_row]
[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_column_text]
[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_column_text]
[/vc_column_text][/vc_column][/vc_row]
There are no reviews yet.