Raspberry Pi Zero W Package E Basic Development Kit 16GB Micro SD Card, Power Adapter 2.13inch e-Paper HAT, and Basic Components

Raspberry Pi Zero W Package E, with 2.13inch e-Paper HAT

DESCRIPTION

Raspberry Pi Zero W (built-in WiFi) Development Kit Type E, Micro SD Card, Power Adapter, 2.13inch e-Paper HAT, and Basic Components

Overview

This development kit includes: the Raspberry Pi Zero W (built-in WiFi), 16GB Micro SD Card, 5V 2.5A Power Adapter, 2.13inch e-Paper HAT (B) which is a three-color e-ink display.

The kit also comes with some most basic components you may need to get going with your Pi Zero: Mini HDMI to HDMI Adapter, Micro USB OTG Cable, and 2×20-pin 2.54 male/female pinheader strips.

Raspberry Pi Zero W Features

• Broadcom BCM2835
  • 1GHz ARM11 single-core processor
• 512MB RAM
• Added wireless connectivity
  • 802.11 b/g/n wireless LAN
  • Bluetooth 4.1
  • Bluetooth Low Energy (BLE)
• Micro SD card slot
• Mini-HDMI port (1080p60 video output)
• Micro-USB power
• Micro-USB OTG port
• 40PIN unpopulated GPIO header (compatible with A+/B+/2B/3B)
• CSI camera connector
• Composite video header
• Composite reset header
• Dimension: 65mm x 30mm x 5mm

2.13inch e-Paper HAT (B) Features

• No backlight, keeps displaying last content for a long time even when power down
• Ultra low power consumption, basically power is only required for refreshing
• Compatible with Raspberry Pi 2B/3B/Zero/Zero W
• Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
• Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

2.13inch e-Paper HAT (B) Specifications

• Operating voltage: 3.3V
• Interface: 3-wire SPI, 4-wire SPI
• Outline dimension: 65mm × 30.2mm
• Display size: 23.71mm × 48.55mm
• Dot pitch: 0.229 × 0.228
• Resolution: 212 × 104
• Display color: red, black, white
• Grey level: 2
• Full refresh time: 15s
• Refresh power: 26.4mW(typ.)
• Standby power: <0.017mW
• Viewing angle: >170

Selection Guide

PACKAGE CONTENT

1. Raspberry Pi Zero W x1
2. Mini HDMI to HDMI Adapter x1
3. Micro USB OTG Cable x1
4. 2×20-pin 2.54 male pinheader strip x1
5. 2×20-pin 2.54 female pinheader strip x1
6. Micro SD Card 16GB x1
7. Power adapter US standard 5V/2.5A USB output x1
8. USB type A plug to micro B plug cable x1
9. 2.13inch e-Paper HAT (B) x1
10. RPi screws pack (2pcs) x1
11. 9-pin 2.54 pitch SMD pinheader x1

1234567891011