Sale!

Raspberry Pi Zero W Package E Basic Development Kit 16GB Micro SD Card, Power Adapter 2.13inch e-Paper HAT, and Basic Components

Availability:

999 in stock

£108.78 £127.98

Raspberry Pi Zero W Package E, with 2.13inch e-Paper HAT

DESCRIPTION

Raspberry Pi Zero W (built-in WiFi) Development Kit Type E, Micro SD Card, Power Adapter, 2.13inch e-Paper HAT, and Basic Components

Overview

This development kit includes: the Raspberry Pi Zero W (built-in WiFi), 16GB Micro SD Card, 5V 2.5A Power Adapter, 2.13inch e-Paper HAT (B) which is a three-color e-ink display.

The kit also comes with some most basic components you may need to get going with your Pi Zero: Mini HDMI to HDMI Adapter, Micro USB OTG Cable, and 2×20-pin 2.54 male/female pinheader strips.

Raspberry Pi Zero W Features

  • Broadcom BCM2835
    • 1GHz ARM11 single-core processor
  • 512MB RAM
  • Added wireless connectivity
    • 802.11 b/g/n wireless LAN
    • Bluetooth 4.1
    • Bluetooth Low Energy (BLE)
  • Micro SD card slot
  • Mini-HDMI port (1080p60 video output)
  • Micro-USB power
  • Micro-USB OTG port
  • 40PIN unpopulated GPIO header (compatible with A+/B+/2B/3B)
  • CSI camera connector
  • Composite video header
  • Composite reset header
  • Dimension: 65mm x 30mm x 5mm

2.13inch e-Paper HAT (B) Features

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi 2B/3B/Zero/Zero W
  • Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

2.13inch e-Paper HAT (B) Specifications

  • Operating voltage: 3.3V
  • Interface: 3-wire SPI, 4-wire SPI
  • Outline dimension: 65mm × 30.2mm
  • Display size: 23.71mm × 48.55mm
  • Dot pitch: 0.229 × 0.228
  • Resolution: 212 × 104
  • Display color: red, black, white
  • Grey level: 2
  • Full refresh time: 15s
  • Refresh power: 26.4mW(typ.)
  • Standby power: <0.017mW
  • Viewing angle: >170

Selection Guide

Package Contents

Products

Item

Description

Raspberry Pi Zero W

Raspberry Pi Zero original V1.3

Mini HDMI to HDMI Adapter

Mini HDMI male to standard HDMI female

Micro USB OTG Cable

Micro USB to USB

2×20-pin 2.54 male pinheader strip

Can be soldered in the Zero

2×20-pin 2.54 female pinheader strip

Can be soldered in the Zero

Micro SD Card 16GB

Class 10 16GB Micro SD Card

5V 2.5A Power Adapter

5V 2.5A output

Raspberry Pi Zero Case

Official Case for the Zero

USB HUB HAT

USB HUB, USB to UART

2.13inch e-Paper HAT (B)

2.13inch e-ink display, three-color: red, black, and white

PACKAGE CONTENT

  1. Raspberry Pi Zero W x1
  2. Mini HDMI to HDMI Adapter x1
  3. Micro USB OTG Cable x1
  4. 2×20-pin 2.54 male pinheader strip x1
  5. 2×20-pin 2.54 female pinheader strip x1
  6. Micro SD Card 16GB x1
  7. Power adapter US standard 5V/2.5A USB output x1
  8. USB type A plug to micro B plug cable x1
  9. 2.13inch e-Paper HAT (B) x1
  10. RPi screws pack (2pcs) x1
  11. 9-pin 2.54 pitch SMD pinheader x1

1234567891011

SKU: 32837490854 Category:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Raspberry Pi Zero W Package E Basic Development Kit 16GB Micro SD Card, Power Adapter 2.13inch e-Paper HAT, and Basic Components”

There are no reviews yet.

Instagram
WhatsApp